LEADING THE WAY
Power, reliability and efficiency. These are the advantages of owning a Yamaha F200B. The Yamaha F200B has built a legendary reputation for its excellent economy and unrivaled reliability.
A double overhead cam design with four valves per cylinder increases the intake and exhaust efficiency for clean and powerful combustion. This configuration is matched with electronic fuel injection for excellent fuel economy throughout the RPM range.
Your new Yamaha EFI engine is the ultimate in reliability and technological innovation.
- 60 degrees V6 Engine – Compact and high performance
- 24-Valve Double OverHead Camshaft Direct Action V6 – high power and torque
- In-Bank-Exhaust – Compact & Lightweight
- ECM Micro-Computer Control – reliability, high performance, convenience & economy
- YDIS : Yamaha Diagnostic System – Serviceability & Reliability
- Blow-By-Gas Reburning System – Cleanness
- High Output Alternator – convenience
- Fuel injection – high performance & economy
- Prime Start – Sure Start
- Water Sealed Outer Wall & Labyrinth Exhaust System – Quietness
- Over-Rev Limiter, Overheat Warning & Low Oil Pressure Warning – reliability
- Yamaha ideal anti-corrosion system – YDC-30, multi-anodes & alumite – durability
Rigging Price*
(Engine and accessories included)
–
Rigging Less Price*
(Single Engine)
F250 HETX RL-S-N Rp 331.700.000
FL250 HETX RL-S-C Rp 342.300.000
F250 HETU RL-S-Nu Rp 341.300.000
FL250 HETU RL-S-Cu Rp 367.800.000
F250 HETX RL-D-NN Rp 650.600.000
F250 HETX RL-D-NC Rp 660.200.000
F250 HETX RL-D-CC Rp 671.800.000
F250 HETU RL-D-NuNu Rp 675.000.000
F250 HETU RL-D-NuCu Rp 689.300.000
F250 HETX RL-T-NNN Rp 974.900.000
F250 HETX RL-T-NNC Rp 981.300.000
F250 HETX RL-T-NNuC Rp 992.900.000
F250 HETU RL-T-NuNuCu Rp 1.101.900.000
F250 HETX RL-T-NNNu Rp 977.000.000
F250 HETX RL-T-NuNuNu Rp 988.600.000
RL: Rigging Less
S: Single Engine
D: Double Engine
T: Triple Engine
N: Normal Rotation
Nu: Normal Rotation Ultra
C: Couter Rotation
*Prices are subject to change at any time
Specifications
| 4-Tak | 250 PK |
| Delivery Condition | Franco Warehouse PT KBA Jakarta |
| Engine Type | 24-Valve, DOHC – VCT, Direct Action, 60° V6 |
| Transom Height | X = 25.3 in |
| Volume (content) Cylinder (cm3) | 3352 cc |
| Diameter x Step | 94.0 mm x 80.5 mm |
| Maximum Operating Range | 5000 – 6000 rpm |
| Compression Comparison | 9.9 |
| Propeller Pitch | 19 |
| Material Propeller | Stainless Steel |
| Ignition System | TCI Micro – Computer |
| Fuel Consumption | 75.6 /h @5500 r/min |
| Gear Comparison | 2.0 (30/15) |
| Fuel Induction System | Electronic Fuel Injection |
| Trim & Tilt Method | Power Trim Tilt |
| Steering System | Remote |
